|
|
| Ubicación en el Menú |
|---|
| Part -> Cone |
| Entornos de trabajo |
| Part, Complete |
| Atajo de teclado por defecto |
| Ninguno |
| Introducido en versión |
| - |
| Ver también |
| Part CreatePrimitives |
Description
The 
Part Cone command creates a parametric cone solid. In the coordinate system defined by its DatosPlacement property, the bottom face of the cone lies on the XY-plane with its center at the origin.
The default Part Cone is truncated. It can be turned into a full, untruncated, cone by changing its DatosRadius1 or DatosRadius2 property to zero. It can be turned into a segment of a cone by changing its DatosAngle property.
Usage
- There are several ways to invoke the command:
- Press the Cone button.
- Select the Part → Primitives → Cone option from the menu.
- Press the
- The Cone object is created.
- Optionally change the dimensions and DatosPlacement of the cone by doing one of the following:
- Double-click the object in the Tree View:
- The Geometric Primitives task panel opens.
- Change one or more properties.
- The object is dynamically updated in the 3D View.
- Press the OK button to close the task panel.
- Change the properties in the Property View.
- Change the DatosPlacement with the
Std TransformManip command.
- Double-click the object in the Tree View:
Example
A Part Cone object created with the scripting example below is shown here.
Notes
- A Part Cone can also be created with the
Part Primitives command. With that command you can specify the dimensions and placement at creation time.
Properties
See also: Property View.
A Part Cone object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Attachment
The object has the same attachment properties as a Part Part2DObject.
Cone
- DatosRadius1 (
Length): The radius of the bottom face of the cone. Can be0mmif DatosRadius2 is larger than0mm. The default is2mm. - DatosRadius2 (
Length): The radius of the top face of the cone. Can be0mmif DatosRadius1 is larger than0mm. The default is4mm. - DatosHeight (
Length): The height of the cone. The default is10mm. - DatosAngle (
Angle): The angle of the circular arc that defines the top and bottom face of the cone. Valid range:0° < value <= 360°. The default is360°. If it is smaller than360°the resulting solid will be a segment of a cone.
Scripting
See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.
A Part Cone can be created with the addObject() method of the document:
cone = FreeCAD.ActiveDocument.addObject("Part::Cone", "myCone")
- Where
"myCone"is the name for the object. - The function returns the newly created object.
Example:
import FreeCAD as App
doc = App.activeDocument()
cone = doc.addObject("Part::Cone", "myCone")
cone.Radius1 = 5
cone.Radius2 = 10
cone.Height = 50
cone.Angle = 270
cone.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(30, 60, 15))
doc.recompute()
Esta página ha sido recuperada de https://wiki.freecad.org/Part_Cone