Donate

Parallel

Tangent

Croquizador

Descripción

The Sketcher ConstrainPerpendicular tool constrains two lines to be perpendicular, or two edges, or an edge and an axis, to be perpendicular at their intersection. Lines are treated as infinite, and open curves are virtually extended as well. The constraint can also connect two edges, forcing them to be perpendicular at the joint.

Utilización

See also: Drawing aids.

Continue mode

1. Make sure there is no selection.
2. There are several ways to invoke the tool:
   • Press the Perpendicular Constraint button.
   • Select the Sketch → Constraints → Perpendicular Constraint option from the menu.
   • introduced in 1.0: Right-click in the 3D View and select the Constrain → Perpendicular Constraint option from the context menu.
   • Use the keyboard shortcut: N.
3. The cursor changes to a cross with the tool icon.
4. Do one of the following:
   • Select two edges. One of the edges must be a straight line or an axis. The other can be any edge except a B-spline.
   • Select a point and two edges (in that order).
   • Select an edge, a point and another edge (idem).
5. A perpendicular constraint is added. If a point and two edges have been selected, up to two point-on-object constraints can also be added. See Examples.
6. Optionally keep creating constraints.
7. To finish, right-click or press Esc, or start another geometry or constraint creation tool.

Run-once mode

1. Do one of the following:
   • Select two edges (see above).
   • Select two endpoints belonging to different edges.
   • Select an edge and the endpoint of another edge (in any order).
   • Select a point and two edges (idem).
2. Invoke the tool as described above, or with one of the following additional options:
   • introduced in 1.0: Right-click in the 3D View and select the Perpendicular Constraint option from the context menu.
   • Right-click in the Elements section of the Sketcher Dialog and select the Perpendicular Constraint option from the context menu.
3. A perpendicular constraint is added. If a point and two edges have been selected, up to two point-on-object constraints can also be added. See Examples.

Examples

Between two edges

The two edges are made perpendicular at their (virtual) intersection. If one of the edges is a conic, a point object that has a point-on-object constraint with both (extended) edges is added.

Between two endpoints

The endpoints are made coincident, and the edges are made perpendicular at that point.

Between edge and endpoint

The endpoint of one edge is constrained to lie on the other edge, and the edges are made perpendicular at that point.

Between two edges at point

The two edges are made perpendicular at a given point. The point can be any point, e.g. the center of a circle, the endpoint of an edge, or the origin, it can belong to one of the edges, and it can also be a point object. If required point-on-object constraint(s) are added to ensure the point lies on both (extended) edges. These additional constraints are called helper constraints.

Scripting

Perpendicular Constraint can be created from macros and from the python console by using the following:

# direct perpendicularity
Sketch.addConstraint(Sketcher.Constraint('Perpendicular',icurve1,icurve2))

# point-to-point perpendicularity
Sketch.addConstraint(Sketcher.Constraint('Perpendicular',icurve1,pointpos1,icurve2,pointpos2))

# point-to-curve perpendicularity
Sketch.addConstraint(Sketcher.Constraint('Perpendicular',icurve1,pointpos1,icurve2))

# perpendicular-via-point (plain constraint, helpers are not added automatically)
Sketch.addConstraint(Sketcher.Constraint('PerpendicularViaPoint',icurve1,icurve2,geoidpoint,pointpos))

where:

• Sketch is a sketch object
• icurve1, icurve2 are two integers identifying the curves to be made perpendicular. The integers are indexes in the sketch (the value, returned by Sketch.addGeometry).
• pointpos1, pointpos2 should be 1 for start point and 2 for end point.
• geoidpoint and pointpos in PerpendicularViaPoint are the indexes specifying the point of perpendicularity.

The Sketcher scripting page explains the values which can be used for icurve1, icurve2, pointpos1, pointpos2 and geoidpoint, and contains further examples on how to create constraints from Python scripts.

Parallel Constraint

Tangent/Collinear Constraint

Sketcher