Donate

CompOffsetTools

2D Offset

Part

Descriere

→

Notes

• App Link objects linked to the appropriate object types and App Part containers with the appropriate visible objects inside can also be used as source objects. introduced in 0.20

→

Object with small offset and rounded (arc) corners.

Same object with sharp (intersection) corners.

Same object with thick distance overfilling the front left gap and allowed intersections.

Arbitrary shape (Draft Wire) with a 3D Offset (ignores MODE parameter).

Same shape with a 3D Offset as SKIN and filled offset.

filled offset with 2 Cylinders creating boolean cuts. Cylinder A goes through the FILL whilst Cylinder B only goes through the FILL and NOT through the source 2D shape.

• DateOffset: Distance to offset the faces of the shape.
• DateMode: Mode of creation. Skin creates a new shape around the source shape. Pipe (todo). RectoVerso (todo).
• DateJoin type: How the new corners are build up. Intersection gives sharp corners by linear extension of the edges. Arc and Tangent give rounded corners.

1. Option: Intersection: Allows offsets pointing inwards to "overflow" the gap by intersecting the resulting shape until opposite faces are reached.
2. Option: Self Intersection: (todo).
3. Option: Fill Offset: When the shape was 2 dimensional, the gap between the 2 shapes gets filled. The fill is now a solid, hence the source shape is not a solid. Thus boolean operations may lead to strange results. (see example below).

CrossSections

Offset2D

Part