FreeCAD: Tu propio modelador paramétrico 3D

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

This page has to be updated for FreeCAD version 1.1.

Redondeo

Borrador

DiseñoPiezas

Ubicación en el Menú
DiseñoPieza Chaflán
DiseñoPieza → Chaflán
Entornos de trabajo
DiseñoPieza
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Redondeo, Pieza Chaflán

Descripción

Esta herramienta crea chaflanes en los bordes seleccionados de un objeto. Se crea una nueva entrada separada de chaflanes (seguida de un número consecutivo si ya existen chaflanes en el documento) en el árbol del proyecto.

Cube with chamfers on all edges

Utilización

Add a chamfer

Optionally activate the Body to chamfer.
There are several ways to select edges to chamfer:
- Select one or more edges of the Body individually.
- Select one or more faces of the Body to select all their edges.
- Select a feature (usually the last feature) of the Body to select all its edges.
For a chain of tangentially connected edges only a single edge needs to be selected, the chamfer will propagate along the chain.
There are several ways to invoke the tool:
- Press the Chamfer button.
- Select the Part Design → Dress-Up Features → Chamfer option from the menu.
If there is no active Body, and there are two or more Bodies in the document, the Active Body Required dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
The Chamfer Parameters task panel opens. See Options for more information.
Press the OK button to finish.

Edit a chamfer

Do one of the following:
- Double-click the Chamfer object in the Tree View
- Right-click the Chamfer object in the Tree View and select Edit Chamfer from the context menu.
The Chamfer Parameters task panel opens. See Options for more information.
Press the OK button to finish.

Options

To add edges do one of the following:
- Press the Add button to start selecting edges and/or faces in the 3D View.
- To select all remaining edges do the following:
  1. If required press the Add button.
  2. Use the Ctrl+Shift+A keyboard shortcut, or right-click the list and select Add All Edges from the context menu.
To remove edges do one of the following:
- Press the Remove button to start deselecting edges and/or faces in the 3D View. Selected elements are highlighted in purple.
- Select one or more elements in the list and press the Del key, or right-click the list and select Remove from the context menu.
Specify a chamfer Type:
- Equal distance: One distance is used to place both chamfer edges.
- Two distances: Two distances are used to place the chamfer edges.
- Distance and angle: A distance is used to place one chamfer edge, the placement of the other chamfer edge is defined by the angle of the chamfer.
Press the Flip direction button to flip the direction of the chamfer (deactivated for Equal distance).
Set the Size of the chamfer.
Set the Size2 of the chamfer (only available if Two distances is selected).
Set the Angle of the chamfer (only available if Distance and angle is selected).
Check the Use all edges checkbox to select all edges of the previous feature. This deactivates the selection list and the related buttons.

Notes

DiseñoPieza Chaflán VS. Pieza Chaflán

"El DiseñoPiezas chaflán no debe confundirse con su Ambiente de trabajo piezas contraparte". Aunque comparten el mismo icono, no son lo mismo, y no se usan de la misma manera. La principal diferencia es que DiseñoPiezas Chaflán crea una entrada de chaflán separada (seguida de un número secuencial si ya existen chaflanes) en el árbol de proyecto para el cuerpo actual. El Piezas chaflán se convierte en el padre del objeto al que se aplicó.

Properties

Data

Base

DatosBase (LinkSub): Link to the selected edges and faces of the parent feature. Can be a link to only the parent feature if DatosUse All Edges is true.
DatosSupport Transform (Bool): If true the chamfered shape of the additive/subtractive parent feature will be used when the chamfer object is included in a pattern, else only the shape of the chamfer itself will be used. The default is false.
Datos (hidden)Add Sub Shape (PartShape)
Datos (hidden)Base Feature (Link): Link to the parent feature.
Datos (hidden)_ Body (LinkHidden): Link to the parent body.

Chamfer

DatosChamfer Type (Enumeration): The chamfer type: Equal distance (default), Two distances or Distance and Angle.
DatosSize (QuantityConstraint): The first chamfer distance. The default is 1 mm.
DatosSize2 (QuantityConstraint): The second chamfer distance. Only used if DatosChamfer Type is Two distances. The default is 1 mm.
DatosAngle (Angle): The chamfer angle. Only used if DatosChamfer Type is Distance and Angle. The default is 45 °.
DatosFlip Direction (Bool): If true the direction of the chamfer is flipped. Not used if DatosChamfer Type is Equal distance. The default is false.
DatosUse All Edges (Bool): If true all edges of the feature are chamfered, and the edges specified by DatosBase are ignored. The default is false.

Part Design

DatosRefine (Bool): If true redundant edges are removed from the result of the operation. The default value is determined by the Automatically refine model after sketch-based operation preference. See PartDesign Preferences.

Known issues

See PartDesign Fillet.