|
|
| Ubicación en el Menú |
|---|
| Croquis → Crear croquis |
| Entornos de trabajo |
| Croquizador |
| Atajo de teclado por defecto |
| Ninguno |
| Introducido en versión |
| - |
| Ver también |
| DiseñoPieza Nuevo croquis, Croquizador MapearCroquis, Croquizador Reorientar |
Descripción
Esto creará un nuevo Croquis.
Tenga en cuenta que la 
Ambiente de trabajo DiseñoPiezas tiene su propia herramienta nuevo croquis, cuando se trabaja en un Cuerpo DiseñoPiezas es preferible utilizar esa herramienta.
Utilización
- If the sketch should be attached to existing geometry: select an object with a shape, or one or more vertices, edges, and/or faces, and/or a plane.
- There are several ways to invoke the tool:
- Press the
New Sketch button. - Select the Sketch → New Sketch option from the menu.
- Press the
- If geometry has been selected:
- The Sketch Attachment dialog opens.
- Select an attachment method from the dropdown list. Or select Do not attach to ignore the selection.
- Press the OK button.
- If there is no selection, or Do not attach has been selected in the previous step:
- The Choose Orientation dialog opens.
- Specify the plane for the orientation. The plane is relative to the local coordinate system the sketch is in:
- If the Reverse direction checkbox is not checked:
- Top: XY-plane
- Front: XZ-plane
- Right: YZ-plane
- If the Reverse direction checkbox is checked:
- Bottom: XY-plane
- Rear: XZ-plane
- Left: YZ-plane
- If the Reverse direction checkbox is not checked:
- Optionally change the Offset. The offset is measured along the Z, Y or X-axis of the local coordinate system.
- Press the OK button.
- A sketch is created.
- The sketch is put in edit mode and the Sketcher Dialog opens.
- To finish edit mode see
Sketcher LeaveSketch.
Notes
- Existing sketches can be attached to (different) object(s) with Sketcher MapSketch or detached and reoriented with Sketcher ReorientSketch.
Esta página ha sido recuperada de https://wiki.freecad.org/Sketcher_NewSketch