FreeCAD Logo FreeCAD 1.0
  • Engleză Afrikaans Arabă Belarusă Catalană Cehă Germană Greacă Spaniolă Spaniolă Bască Finlandeză Filipineză Franceză Galiciană Croată Maghiară Indoneziană Italiană Japoneză Kabyle Coreeană Lituaniană Olandeză Norvegiană Bokmål Poloneză Portugheză Portugheză Română Rusă Slovacă Slovenă Sârbă Suedeză Turcă Ucrainiană Valenciană Vietnameză Chineză Chineză
  • Funcții
  • Descarca
  • Blog
  • Documentaţie
    Indicele documentului Primii pasi Documentație utilizatori Manualul utilizatorului FreeCAD Documentaţia Atelierelor Documente despre codarea în limbajul python C++ coding documentation Tutoriale Întrebări frecvente Privacy policy About FreeCAD
  • Contribuiți
    Cum să ajuți Sponsor Raportează o problemă Efectuează o cerere de tragere Locuri de muncă și finanțare Orientări privind contribuția Developers handbook Translations
  • Comunitate
    Code of conduct Forum The FPA GitHub GitLab Codeberg Mastodon Matrix IRC IRC via Webchat Gitter Discord Reddit Twitter Facebook LinkedIn Calendar
  • ♥ Donate

Donate

$
Informaţii SEPA
Te rugăm să-ți configurezi transferul bancar SEPA în:
Beneficiary: The FreeCAD project association
IBAN: BE04 0019 2896 4531
BIC/SWIFT: GEBABEBBXXX
Agenție bancară: BNP Paribas Fortis
Adresă: Rue de la Station 64, 1360 Perwez, Belgium

While Stripe doesn't support monthly donations, you can still become a sponsor! Simply make a one-time donation equivalent to 12 months of support, and you'll gain access to the corresponding sponsoring tier. It's an easy and flexible way to contribute.

If you are not sure or not able to commit to a regular donation, but still want to help the project, you can do a one-time donation, of any amount.

Choose freely the amount you wish to donate one time only.

You can support FreeCAD by sponsoring it as an individual or organization through various platforms. Sponsorship provides a steady income for developers, allowing the FPA to plan ahead and enabling greater investment in FreeCAD. To encourage sponsorship, we offer different tiers, and unless you choose to remain anonymous, your name or company logo will be featured on our website accordingly.

from 1 USD / 1 EUR per month. You will not have your name displayed here, but you will have helped the project a lot anyway. Together, normal sponsors maintain the project on its feet as much as the bigger sponsors.

from 25 USD / 25 EUR per month. Your name or company name is displayed on this page.

from 100 USD / 100 EUR per month. Your name or company name is displayed on this page, with a link to your website, and a one-line description text.

from 200 USD / 200 EUR per month. Your name or company name and logo displayed on this page, with a link to your website and a custom description text. Companies that have helped FreeCAD early on also appear under Gold sponsors.

Instead of donating each month, you might find it more comfortable to make a one-time donation that, when divided by twelve, would give you right to enter a sponsoring tier. Don't hesitate to do so!

Choose freely the amount you wish to donate each month.

Please inform your forum name or twitter handle as a notein your transfer, or reach to us, so we can give you proper credits!

Hole
Subtractive Loft
PartDesign

PartDesign Groove

Menu location
PartDesign → Groove
Workbenches
PartDesign, Complete
Default shortcut
None
Introduced in version
-
See also
None

Descriere

Instrumentul Canelură/ Groove, învârte o schiță sau un profil selectat pe o anumită axă, tăind materialul din suport.

Above: sketch (A) is revolved around axis (B); resulting groove on solid (C) is shown right.

Cum se folosește

  1. Selectați schița care va fi rotită.
    v0.17 and above A face on the existing solid can alternatively be used.
    v0.16 and below The sketch must be mapped to the planar face of an existing solid or Part Design feature, or an error message will appear .
  2. Press the Groove button.
  3. Set the Groove parameters (see next section).
  4. Press OK.

Opţiuni

Atunci când este crată o canelură, dialogul privind Groove parameters oferă câteva variante de parametrii care specifică cum schița profilului canelurii poate fi rotită.

Axe

Type

introduced in 1.0

Type offers five different ways of specifying the angle of the groove:

Angle

Enter a numeric value for the Angle of the groove. With the option Symmetric to plane the groove will extend half the given angle to either side of the sketch or face.

Through all

The groove will extend up to the last face of the support it encounters in its direction. With the option Symmetric to plane the groove will cut through all material in both directions.

To first

The groove will extend up to the first face of the support it encounters in its direction.

Up to face

The groove will extend up to a face. Press the Face button and select a face or a datum plane from the Body.

Two angles

This allows to enter a second angle in which the groove should extend in the opposite direction. The directions can be switched by checking the Reversed option.

Axis

Specifies the axis of the groove:

This option specifies the axis about which the sketch is to be revolved.

  • Vertical sketch axis: selects the vertical sketch axis .
  • Horizontal sketch axis: selects the horizontal sketch axis.
  • Sketch axis: v0.16 and below selects a construction line contained in the sketch used by the Groove. The first construction line created in the sketch will be labelled Sketch axis 0. The drop down list will contain one custom sketch axis for each construction line.
  • Construction line: v0.17 and above selects a construction line contained in the sketch used by the Groove. The drop down list will contain an entry for each construction line. The first construction line created in the sketch will be labelled Construction line 1.
  • Base (X/Y/Z) axis: v0.17 and above selects the X, Y or Z axis of the Body's Origin;
  • Select reference...: v0.17 and above allows selection in the 3D view of an edge on the Body, or a datum line.

Note that when changing the axis, the Reversed option may be (un)checked automatically.

Unghiul

This controls the angle through which the groove is to be formed, e.g. 360° would be a full, contiguous revolution. It is not possible to specify negative angles (use the Reversed option instead) or angles greater than 360° .

2nd angle

introduced in 1.0

Defines the angle of the groove in the opposite direction. This option is only available if Type is Two angles and Angle is smaller than 360°.

Planul simetric

If checked, the groove will extend half of the specified angle in both directions from the sketch plane .

Reversed

If checked, the direction of revolution is reversed from default clockwise to counterclockwise .

Proprietăți

Data

Groove

  • DateType (Enumeration)
  • DateBase (Vector): (read-only)
  • DateAxis (Vector): (read-only)
  • DateAngle (Angle)
  • DateAngle2 (Angle)
  • DateUp To Face (LinkSub)
  • DateReference Axis (LinkSub)

Part Design

  • DateRefine (Bool)

Sketch Based

  • DateProfile (LinkSub)
  • DateMidplane (Bool)
  • DateReversed (Bool)
  • DateAllow Multi Face (Bool)

Notes

  • 0.21 and below: A ShapeBinder cannot be used for the profile.
  • 0.21 and below: When using a SubShapeBinder for the profile, selecting the binder in the Tree View will fail, instead the binder's face has to be selected in the 3D View.


Hole
Subtractive Loft
PartDesign

Această pagină este preluată de la https://wiki.freecad.org/PartDesign_Groove

Intrați în legătură!
Forum GitHub Mastodon Matrix IRC Gitter.im Discord Reddit Twitter Facebook LinkedIn

© The FreeCAD Team. Homepage image credits (top to bottom): ppemawm, r-frank, epileftric, regis, rider_mortagnais, bejant.

Acest proiect este sprijinit de: , KiCad Services Corp. and other sponsors

GitHubImprove this page on GitHub