Donate

Указать диаметр

Указать угловой размер по 3 точкам

Верстак "TechDraw"

Описание

The TechDraw AngleDimension tool adds an angular dimension to a View. The dimension shows the interior angle between two straight edges.

Measuring the angle between two straight edges

Применение

1. Select two straight edges. The geometry may be selected in the 3D View or in the drawing.
2. If you have selected geometry in the 3D View: add the correct TechDraw View to the selection by selecting it in the Tree View.
3. There are several ways to invoke the tool:
   • introduced in 1.0: If the Dimensioning tools preference is set to Single tool (default): press the down arrow to the right of the button and select the Angle Dimension option from the dropdown.
   • If this preference has a different value (and in 0.21 and below): press the Angle Dimension button.
   • Select the TechDraw → Dimensions → Angle Dimension option from the menu.
4. A dimension is added to the View.
5. The dimension may be dragged to the desired position.
6. If needed, add tolerances as described on this page.

Display 3D measurement

See TechDraw LengthDimension.

Change properties

To change the properties of a dimension object either double-click it in the drawing or in the Tree View. This will open the Dimension task panel.

Ограничения

Dimension objects are vulnerable to the "topological naming problem". See TechDraw LengthDimension.

Notes

See TechDraw LengthDimension.

Свойства

See TechDraw LengthDimension.

Указать диаметр

Указать угловой размер по 3 точкам

Верстак "TechDraw"