|
Sketcher Reorient |
| Localização do menu |
|---|
| Part design → Reorient sketch |
| Bancadas de trabalho |
| Sketcher, PartDesign |
| Atalho padrão |
| Nenhum |
| Introduzido na versão |
| - |
| Veja também |
| Map sketch, New Sketch |
Description
The 
Sketcher ReorientSketch tool places a sketch on one of the main planes with an optional offset. It can also be used to detach a sketch.
Usage
- Select a sketch.
- There are several ways to invoke the tool:
- Press the Reorient Sketch button (not available in the PartDesign Workbench).
- Select the Sketch → Reorient Sketch option from the menu.
- Press the
- If the sketch is attached:
- The Sketch Has Support dialog opens.
- Press the Yes button to detach the sketch.
- The Choose Orientation dialog opens.
- Optionally press the Cancel button to only detach the sketch and finish the tool.
- Specify the plane for the orientation. The plane is relative to the local coordinate system the sketch is in:
- If the Reverse direction checkbox is not checked:
- Top: XY-plane
- Front: XZ-plane
- Right: YZ-plane
- If the Reverse direction checkbox is checked:
- Bottom: XY-plane
- Rear: XZ-plane
- Left: YZ-plane
- If the Reverse direction checkbox is not checked:
- Optionally change the Offset. The offset is measured along the Z, Y or X-axis of the local coordinate system.
- Press the OK button.
Esta página foi obtida de https://wiki.freecad.org/Sketcher_ReorientSketch