|
Skicář Změna orientace |
| Umístění Menu |
|---|
| Návrh dílu → Změna orientace náčrtu |
| Pracovní stoly |
| Skicář, Návrh dílu |
| Výchozí zástupce |
| Nikdo |
| Představen ve verzi |
| - |
| Viz také |
| Vyznač náčrt, Nový náčrt |
Popis
The 
Sketcher ReorientSketch tool places a sketch on one of the main planes with an optional offset. It can also be used to detach a sketch.
Usage
- Select a sketch.
- There are several ways to invoke the tool:
- Press the Reorient sketch button (not available in the PartDesign Workbench).
- Select the Sketch → Reorient sketch option from the menu.
- Press the
- If the sketch is attached:
- The Sketch has support dialog opens.
- Press the Yes button to detach the sketch.
- The Choose orientation dialog opens.
- Optionally press the Cancel button to only detach the sketch and finish the tool.
- Specify the plane for the orientation. The plane is relative to the local coordinate system the sketch is in:
- If the Reverse direction checkbox is not checked:
- Top: XY-Plane
- Front: XZ-Plane
- Right: YZ-Plane
- If the Reverse direction checkbox is checked:
- Bottom: XY-Plane
- Rear: XZ-Plane
- Left: YZ-Plane
- If the Reverse direction checkbox is not checked:
- Optionally change the Offset. The offset is measured along the Z, Y or X axis of the local coordinate system.
- Press the OK button.
Tato stránka je načtena z https://wiki.freecad.org/Sketcher_ReorientSketch