|
|
| Расположение в меню |
|---|
| Робот → Край траектории |
| Верстаки |
| Robot |
| Быстрые клавиши |
| Нет |
| Представлено в версии |
| - |
| См. также |
| Нет |
Описание
Добавляет новый объект, преобразующий грани (edges) в траекторию.
Применение
- Select edges from a single object in the 3D View.
- There are several ways to invoke the command:
- Press the
Edge to Trajectory button. - Select the Robot → Edge to Trajectory option from the menu.
- Press the
- The TaskEdge2TracParameter task panel opens. See below for more information.
- Press the OK button to finish the command.
Task panel
- At the top of the panel the name of the selected object is displayed.
- Selected edges are displayed in the list at the bottom of the panel.
- Optionally press the Hide/Show button to change the visibility of the object.
- To add or remove edges: hold down Ctrl and select in the 3D View.
- To replace all edges: select an edge in the 3D View without holding down Ctrl.
- Optionally press the Apply button to update the Edges and Cluster values.
Примечания
Robot TrajectoryDressUp can be used to change the values of a trajectory.
Эта страница получена от https://wiki.freecad.org/Robot_Edge2Trac