This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
|
|
| Posizione nel menu |
|---|
| Path → Incisione |
| Ambiente |
| Path |
| Avvio veloce |
| Nessuno |
| Introdotto nella versione |
| - |
| Vedere anche |
| Nessuno |
Descrizione
Incisione serve principalmente per incidere un testo ShapeString su una parte, ma può essere utile anche per altre lavorazioni 2D
The 
Engrave tool is primarily for engraving a 
Draft ShapeString onto a part. However, it may be useful for other kinds of 2D.
Usage
Empty
Options
Empty
Properties
Data
Base
- DatiPlacement:
- DatiLabel: User name of the object (UTF-8)
Depth
- DatiClearance Height: The height needed to clear clamps and obstructions
- DatiFinal Depth: Final Depth of Tool- lowest value in Z
- DatiSafe Height: The above which Rapid motions are allowed.
- DatiStart Depth: Starting Depth of Tool- first cut depth in Z
- DatiStep Down: Incremental Step Down of Tool
Path
- DatiActive: Make False, to prevent operation from generating code
- DatiBase: The base geometry for this operation
- DatiComment: An optional comment for this operation
- DatiCoolant Mode: Coolant mode for this operation
- DatiCycle Time: Estimated cycle time for this operation
- DatiStart Vertex: The vertex index to start the path from
- DatiTool Controller: The tool controller that will be used to calculate the path
- DatiUser Label: User assigned label
Hidden
- DatiBase Object:
- DatiBase Shapes:
- DatiExpression Engine:
- DatiLabel2:
- DatiPath:
- DatiProxy:
- DatiVisibility:
View
Empty
Scripting
See also: FreeCAD Scripting Basics.
Example:
#Place code example here.
Questa pagina è recuperata da https://wiki.freecad.org/CAM_Engrave