GuiCommand: Name: TechDraw HoleShaftFit MenuLocation: TechDraw , Symbols , Add hole or shaft fit Workbenches: TechDraw_Workbench Version: 0.21 SeeAlso: TechDraw_Geometric_dimensioning_and_tolerancing
TechDraw HoleShaftFit
Description
The TechDraw HoleShaftFit tool adds hole or shaft tolerances using ISO 286 to a linear dimension or a diameter dimension.
![](https://raw.githubusercontent.com/FreeCAD/FreeCAD-documentation/master/wiki/images/TechDraw_HoleShaftFitExample.png)
Usage
- Select a single linear dimension (wiki-test2.php?gitpage=length, horizontal or vertical) or a single diameter dimension.
- There are several ways to invoke the tool:
- Press the
Add hole or shaft fit button.
- Select the TechDraw → Symbols →
Add hole or shaft fit option from the menu.
- Press the
- A task panel opens.
- Specify shaft fit or hole fit as applicable.
- Select the desired ISO 286 fit option from the combo box. The corresponding field and the fit type (loose fit, snug fit or press fit) are updated.
- Press the OK button.
- The selected option and the calculated tolerance values are added to the dimension.
{{TechDraw Tools navi}}
⏵ documentation index > TechDraw > TechDraw HoleShaftFit
This page is retrieved from https://github.com/FreeCAD/FreeCAD-documentation/blob/main/wiki/TechDraw_HoleShaftFit.md