GuiCommand: Name: Draft Snap WorkingPlane MenuLocation: Snapping , Snap working plane Workbenches: Draft_Workbench, BIM_Workbench SeeAlso: Draft_Snap, Draft_Snap_Lock, Draft_SelectPlane
Draft Snap WorkingPlane
Description
The Draft Snap WorkingPlane option projects snap points onto the current working plane. It can only be used in combination with another snap option.
Snapping the second point of a line to the projected endpoint of an edge
Usage
For general information about snapping see Draft Snap.
- Optionally change the working plane.
- Make sure snapping is enabled. See
Draft Snap Lock.
- If Draft Snap WorkingPlane is not active do one of the following:
- Press the
Snap working plane button in the Draft snap toolbar.
- Draft: Press the
Snap working plane button in the Draft snap widget.
- BIM: Select the Snapping →
Snap working plane option from the menu, or from the 3D view context menu.
- Press the
- Make sure at least one other snap option is active.
- Choose a Draft or BIM command to create your geometry.
- Note that you can also change snap options while a command is active.
- Move the cursor over the object you want to snap to.
- The object is highlighted.
- If a snap point is found it is projected onto the working plane where it is marked.
- Click to confirm the point.
Preferences
See Draft Snap.
⏵ documentation index > Draft > Draft Snap WorkingPlane
This page is retrieved from https://github.com/FreeCAD/FreeCAD-documentation/blob/main/wiki/Draft_Snap_WorkingPlane.md