GuiCommand: Name: Draft Snap Grid MenuLocation: Snapping , Snap grid Workbenches: Draft_Workbench, BIM_Workbench SeeAlso: Draft_Snap, Draft_Snap_Lock, Draft_ToggleGrid, Draft_SelectPlane
Draft Snap Grid
Description
The Draft Snap Grid option snaps to the intersections of grid lines.
Snapping the second point of a line to the grid
Usage
For general information about snapping see Draft Snap.
- Optionally change the working plane and/or the grid.
- Make sure snapping is enabled. See
Draft Snap Lock.
- If Draft Snap Grid is not active do one of the following:
- Press the
Snap grid button in the Draft snap toolbar.
- Draft: Hold down the
button in the Draft snap widget and in the menu that opens select the
Snap grid option.
- BIM: Select the Snapping →
Snap grid option from the menu, or from the 3D view context menu.
- Press the
- Choose a Draft or BIM command to create your geometry.
- Note that you can also change snap options while a command is active.
- If required use Draft ToggleGrid to display the grid. The grid must be visible for this snap option to work.
- Move the cursor near the intersection of two grid lines.
- If an intersection is found the point is marked and the
icon is displayed near the cursor.
- Click to confirm the point.
Preferences
See Draft Snap.
- Several grid preferences are available: Edit → Preferences... → Draft → Grid and snapping.
⏵ documentation index > Draft > Draft Snap Grid
This page is retrieved from https://github.com/FreeCAD/FreeCAD-documentation/blob/main/wiki/Draft_Snap_Grid.md