GuiCommand: Name: Draft Line MenuLocation: Drafting , Line
2D Drafting , Line Workbenches: Draft_Workbench, BIM_Workbench Shortcut: L I Version: 0.7 SeeAlso: Draft_Wire

Draft Line

Description

The Draft Line command creates a straight line.

A Draft Line is in fact a Draft Wire with only two points.

Usage

See also: Draft Tray, Draft Snap and Draft Constrain.

1. There are several ways to invoke the command:
   • Press the Line button.
   • Draft: Select the Drafting → Line option from the menu.
   • BIM: Select the 2D Drafting → Line option from the menu.
   • Use the keyboard shortcut: L then I.
2. The Line task panel opens. See Options for more information.
3. Pick the first point in the 3D view, or type coordinates and press the Enter point button.
4. Pick the second point in the 3D view, or type coordinates and press the Enter point button.

Options

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 1.0).

• To manually enter coordinates enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
• To use polar coordinates enter a value for the Length and a value for the Angle, and press Enter after each.
• Check the Angle checkbox to constrain the pointer to the specified angle.
• Press L to change the focus from the X input box to the Length input box and back. Depending on the input box that receives the focus the Angle checkbox is checked or unchecked.
• Press R or click the Relative checkbox to toggle relative mode. If relative mode is on, the coordinates of the second point are relative to the first point, else they are relative to the coordinate system origin.
• Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system.
• Press N or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating lines.
• Press S to switch Draft snapping on or off.
• Press Esc or the Close button to abort the command.

Notes

• A Draft Line can be edited with the Draft Edit command.
• Draft Lines and Draft Wires can be joined with the Draft Wire command, the Draft Join command or the Draft Upgrade command.

Preferences

See also: Preferences Editor and Draft Preferences.

• To change the initial focus of the task panel to the Length input box: Edit → Preferences... → Draft → General → Set focus on Length instead of X coordinate. Note that you must move the pointer in the 3D view for the change to take effect.
• If the Edit → Preferences... → Draft → General → Create Part primitives if possible option is checked, the command will create a Part Line instead of a Draft Line.

Properties

See Draft Wire.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

To create a Draft Line use the make_line method ((v0.19) ) of the Draft module. This method replaces the deprecated makeLine method.

line = make_line(p1, p2)
line = make_line(LineSegment)
line = make_line(Shape)

• Creates a Line object between points p1 and p2, each defined by its FreeCAD.Vector, with units in millimeters.
• Creates a Line object from a Part.LineSegment.
• Creates a Line object from the first vertex to the last vertex of the given Shape.

Example:

import FreeCAD as App
import Draft

doc = App.newDocument()

p1 = App.Vector(0, 0, 0)
p2 = App.Vector(1000, 500, 0)
p3 = App.Vector(-250, -500, 0)
p4 = App.Vector(500, 1000, 0)

line1 = Draft.make_line(p1, p2)
line2 = Draft.make_line(p3, p4)

doc.recompute()

⏵ documentation index > Draft > Draft Line

This page is retrieved from https://github.com/FreeCAD/FreeCAD-documentation/blob/main/wiki/Draft_Line.md