GuiCommand: Name: Assembly3 ConstraintDiameter Icon: Assembly_ConstraintDiameter.svg Workbenches: Assembly3_Workbench
Assembly3 ConstraintDiameter
Description
The Diameter command constrains the diameter of a 2D circle or arc which is made with
Draft Workbench tools in relation with a
workplane.
To set the diameter edit the Diameter parameter in the properties panel.
Usage
-
Select a 2D circle or arc
-
Activate the
Diameter command using the:
**<img src="https://raw.githubusercontent.com/FreeCAD/FreeCAD-documentation/master/wiki/images/Assembly_ConstraintDiameter.svg" width=16px> [Diameter](wiki-test2.php?gitpage=Assembly3_ConstraintDiameter)
**
button.
-
Set the Diameter value in the (constraint\'s) properties panel.
-
Press the
Solve constraints or the
Quick solve button to recompute
:
: (if **<img src="https://raw.githubusercontent.com/FreeCAD/FreeCAD-documentation/master/wiki/images/Assembly_AutoRecompute.svg" width=16px> [Auto recompute](wiki-test2.php?gitpage=Assembly3_AutoRecompute)** and **<img src="https://raw.githubusercontent.com/FreeCAD/FreeCAD-documentation/master/wiki/images/Assembly_SmartRecompute.svg" width=16px> [Smart recompute](wiki-test2.php?gitpage=Assembly3_SmartRecompute)** are disabled).
⏵ documentation index > Assembly3 ConstraintDiameter
This page is retrieved from https://github.com/FreeCAD/FreeCAD-documentation/blob/main/wiki/Assembly3_ConstraintDiameter.md