The TopoShape is the mother object of the Part Module. All shape types (wire, face, solid, etc...) of the Part module are TopoShapes, and share the following attributes and methods. Example:
import Part
sh = Part.makeBox(10,10,10)
print sh.Faces
for f in sh.Faces:
print f.Edges
AreaReturns: The total area of the faces of the shape.
BoundBoxReturns: The BoundBox of the object
CenterOfMassReturns: The center of mass of the current system. If the gravitational field is uniform, it is the center of gravity. The coordinates returned for the center of mass are expressed in the absolute Cartesian coordinate system.
CompSolidsReturns: Lists the subsequent shapes in this shape.
CompoundsReturns: Lists the coumpounds in this shape.
EdgesReturns: Lists the Edges in this shape.
FacesReturns: Lists the faces in this shape.
LengthReturns: Total length of the edges of the shape.
MatrixReturns: The current transformation of the object as matrix
OrientationReturns: the orientation of the shape.
PlacementReturns: The current transformation of the object as placement
ShapeTypeReturns: The type of the shape.
ShellsReturns: Lists the subsequent shapes in this shape.
SolidsReturns: List of subsequent shapes in this shape.
VertexesReturns: List of vertexes in this shape.
VolumeReturns: Total volume of the solids of the shape.
WiresReturns: List of wires in this shape.
approximate( )Description: Approximates a B-Spline-curve from this wire
Returns: a BSplineCurve object
check( )Description: Checks the shape and report errors in the shape structure. This is a more detailed check as done in isValid().
Returns:
common(TopoShape)Description: Intersection of this and a given topo shape.
Returns: a TopoShape
complement( )Description: Computes the complement of the orientation of this shape, i.e. reverses the interior/exterior status of boundaries of this shape.
Returns: a TopoShape
copy( )Description: Creates a copy of this shape
Returns: a TopoShape
cut(TopoShape)Description: Difference of this and a given topo shape.
Returns: a TopoShape
distToShape( TopoShape )Description: Calculates the minimum distance between this and a given TopoShape.
Returns: float<minimum distance>,list<nearest points>,list<nearest subshapes & parameters>
exportBrep( string )Description: Exports the content of this shape to an BREP file. BREP is a CasCade native format.
Returns:
exportIges( string )Description: Exports the content of this shape to an IGES file.
Returns:
exportStep( string )Description: Exports the content of this shape to an STEP file.
Returns:
exportStl( string )Description: Exports the content of this shape to an STL mesh file.
Returns:
extrude(Vector)Description: Extrudes the shape along a direction.
Returns: a TopoShape
fuse(TopoShape)Description: Union of this and a given topo shape.
Returns: a TopoShape
getAllDerivedFrom( )Description: Returns all descentences of this object type
Returns: a list
hashCode( )Description: This value is computed from the value of the underlying shape reference and the location. Orientation is not taken into account.
Returns: a string
isClosed( )Description: Checks if the shape is closed.
Returns: a boolean
isDerivedFrom(string)Description: Returns true if given type is a father
Returns: boolean
isEqual(TopoShape)Description: Returns true if both shapes share the same TShape, have the same Location and have the same Orientation.
Returns: a boolean
isInside(Vector,float,Boolean)Description: Checks if a point is inside a solid with a certain tolerance. If the 3rd parameter is True a point on a face is considered as inside
Returns: a boolean
isNull( )Description: Checks if the shape is null.
Returns: a boolean
isPartner(TopoShape)Description: Returns true if both shapes share the same TShape, but may have a different Location and may have a different Orientation.
Returns: a boolean
isSame(TopoShape)Description: Checks if both shapes share the same geometry, true if both shapes share the same TShape, have the same Location but may have a different Orientation.
Returns: a boolean
isValid( )Description: Checks if the shape is valid, i.e. neither null, nor empty nor corrupted.
Returns: a boolean
makeFillet(float,TopoShape)Description: Returns a new object based on TopoShape, but with a fillet of radius 'float' applied to each edge.
Returns: a TopoShape
makeHomogenousWires(wire)Description: Makes this and the given wire homogenous to have the same number of edges
Returns: a wire
makeOffset(float)Description: Offsets the shape by a given ammount
Returns: a TopoShape
makePipe(wire)Description: Makes a pipe by sweeping along a wire.
Returns: a TopoShape
makePipeShell(wire)Description: Makes a loft defined by profiles along a wire.
Returns: a TopoShape
makeShapeFromMesh(mesh)Description: Makes a compound shape out of mesh data. Note: This should be used for rather small meshes only.
Returns: a TopoShape
makeThickness(list,float,float)Description: A hollowed solid is built from an initial solid and a set of faces on this solid, which are to be removed. The remaining faces of the solid become the walls of the hollowed solid, their thickness defined at the time of construction. The arguments to be passed are a list of faces to be skipped, the thickness of the walls and a tolerance value.
Returns: a TopoShape
nullify( )Description: Destroys the reference to the underlying shape stored in this shape. As a result, this shape becomes null.
Returns:
project(TopoShape)Description: Project a shape on this shape
Returns: a TopoShape
read(string)Description: Reads in an IGES, STEP or BREP file.
Returns: a TopoShape
reverse( )Description: Reverses the orientation of this shape.
Returns:
revolve(Vector, Vector, float)Description: Revolves the shape around a Axis to a given degree. ex: Part.revolve(Vector(0,0,0),Vector(0,0,1),360) revolves the shape around the Z Axis 360 degree.
Returns: a TopoShape
rotate(Vector<position>, Vector<direction>, float<angle>)Description: Rotates this shape by angle degrees around an axis specified by position and direction. ex: Shp.rotate(Vector(0,0,0),Vector(0,0,1),180) rotate the shape around the Z Axis 180 degrees.
Returns:
scale(float<factor>, [Vector<centre>])Description: Uniformly scales this shape by factor. Optionally specify centre of scaling transformation.
Returns:
section(TopoShape)Description: Section of this with a given topo shape.
Returns: a TopoShape
sewShape( )Description: Sews the shape if there is a gap.
Returns:
tessellate(float)Description: Tessellate the the shape and return a list of vertices and face indices. The given float is the tolerance.
Returns: a list
toNurbs( )Description: Conversion of the complete geometry of a shape into NURBS geometry. For example, all curves supporting edges of the basis shape are converted into BSpline curves, and all surfaces supporting its faces are converted into BSpline surfaces.
Returns: a NURBS curve
transformGeometry(matrix)Description: Applies geometric transformation on a copy of the shape. The transformation to be applied is defined as a 4x4 matrix. The underlying geometry of the following shapes may change to a curve which supports an edge of the shape, or a surface which supports a face of the shape. For example, a circle may be transformed into an ellipse when applying an affinity transformation. It may also happen that the circle then is represented as a b-spline curve. The transformation is applied to all the curves which support edges of the shape, and all the surfaces which support faces of the shape. Note: If you want to transform a shape without changing the underlying geometry then use the methods translate or rotate.
Returns: a TopoShape
transformShape(matrix)Description: Applies transformation on a shape without changing the underlying geometry.
Returns:
translate(Vector)Description: Applies the translation to the current location of this shape.
Returns:
writeInventor( )Description: Writes the mesh in OpenInventor format to a string.
Returns: a string
Some attributes and methods apply only to certain TopoShapes. These items apply to Edges (TopoShapeEdge).
FirstParameterReturns: The parameter value at one end of the Edge. Not necessarily at Vertex[0]. See Parametric Equations
LastParameterReturns: The parameter value at the other end of the Edge. Not necessarily at Vertex[1].
getParameterByLength(Float)Description: Maps the interval [0,Length] to the interval [FirstParameter,LastParameter]
Returns: Float
valueAt(Float)Description: Returns the 3D vector corresponding to a parameter value.
Returns: Vector
parameterAt(Vertex,[Face])Description: Returns the parameter value corresponding to a Vertex (3D point).
Returns: Float
tangentAt(Float)Description: Returns the direction vector of the tangent to the edge at a parameter value (if it exists).
Returns: Vector
normalAt(Float)Description: Returns the direction vector of the normal to the edge at a parameter value (if it exists uniquely).
Returns: Vector
curvatureAt(Float)Description: Returns the curvature of the edge at a parameter value.
Returns: Float
centerOfCurvatureAt(Float)Description: Returns the center (3D point) of the osculating circle at a parameter value.
Returns: Vector
Această pagină este preluată de la https://wiki.freecad.org/TopoShape_API