|
|
| Расположение в меню |
|---|
| Инструменты → Измерить расстояние |
| Верстаки |
| Все |
| Быстрые клавиши |
| Нет |
| Представлено в версии |
| - |
| См. также |
| Part Measure Linear, Draft Dimension, Arch Survey |
Описание
The Std MeasureDistance command creates a distance object that measures and displays the distance between two points.
Применение
- There are several ways to invoke the command:
- Press the
Std MeasureDistance button. - Select the Tools → Measure distance option from the menu.
- Press the
- Select the first dimension point anywhere on an object in the 3D view.
- Select the second dimension point anywhere on an object in the 3D view.
- The selection order of the points can have an impact on the position of the dimension line.
- Optionally flip the position of the dimension line by changing the ВидMirror property of the distance object.
Примечания
- You cannot use the Draft snap tools with this command.
- To add dimensions to drawings use the dimension tools from the TechDraw Workbench.
- For more comprehensive measuring tools, install the
Manipulator Workbench (an external workbench).
Свойства
Данные
Основные
- ДанныеLabel: by default the label contains the measured distance, but this distance is not updated when P1 or P2 are later changed.
Measurement
- ДанныеP1: the first dimension point.
- ДанныеP2: the second dimension point.
- ДанныеDistance: (read-only) the measured distance between P1 and P2.
Вид
Основные
- ВидDist Factor: this factor, multiplied by the measured distance, determines the dimension line offset.
- ВидFont Size: the height of the letters (line height in pixels).
- ВидMirror: if set to
truethe position of the dimension line relative to P1 and P2 is flipped.
Эта страница получена от https://wiki.freecad.org/Std_MeasureDistance