Donate

되돌리기

내보내기

표준 파일 메뉴

설명

표준 가져오기(Std Import) 명령은 다른 형식의 파일에서 지오메트리를 활성 문서로 가져옵니다. 다양한 파일 형식이 지원되며 어떤 형식에는 가져오기 옵션이 여러 가지 존재합니다. 자세한 내용은 가져오기 내보내기를 참조하십시오.

introduced in 0.21: If an image format is selected the command will create an Image Plane.

용법

선택 사항

• 명령을 중지하려면 Esc 키나 취소 버튼을 누릅니다.

비고

• 가져온 메시 개체를 솔리드로 변환하려면 STL이나 OBJ 가져오기 자습서를 참조하십시오.
• 새 문서로 가져오려면 표준 열기 명령을 사용할 수 있습니다.
• 일부 작업대에는 추가적인 가져오기 명령이 있습니다. 참조: 가져오기 내보내기.

환경 설정

Image Plane

An Image Plane is a planar representation of an image in the 3D view. It can for example be used when creating a model based on photographs of an existing object.

By default an Image Plane is placed on the global XY plane. The initial size of an Image Plane is calculated using a 96px/inch resolution.

Edit

1. To edit an Image Plane do one of the following:
   • Double-click the Image Plane in the Tree view.
   • Right-click the Image Plane in the Tree view and select Change image... from the context menu.
2. If the Image Plane is not plane-parallel to the XY, XZ or YZ plane of the global coordinate system, it is realigned to be plane-parallel to the XY plane.
3. The Image plane settings task panel opens.
4. Optionally select the XY-Plane, XZ-Plane or YZ-Plane of the global coordinate system.
5. Check Reverse direction to rotate the Image Plane 180°. The rotation axis depends on the selected plane. For the XY plane it is the global X axis. For the XZ and YZ plane it is the global Z axis.
6. The Offset, X distance and Y distance are relative to the coordinate system of the Image Plane. A small negative offset can be useful when tracing the image with a sketch or Draft geometry.
7. Optionally change the Transparency.
8. Image size options:
   • Scale by numerical input:
     1. Optionally uncheck Keep aspect ratio for unequal scaling.
     2. Enter a Width and/or Height.
   • Scale by picking points:
     1. Press the Calibrate button.
     2. Pick two points inside the image.
     3. A dimension line is displayed.
     4. Enter the desired dimension.
     5. Press Enter or the Apply button.
9. Press the OK button to confirm the changes and close the task panel.

Properties

See also: Property editor.

An Image Plane object is derived from an App GeoFeature object and inherits all its properties. It also has the following additional properties:

Data

Image Plane

• 데이터Image File (FileIncluded): The image file used for the Image Plane. This file is stored in the .FCStd file.
• 데이터XSize (Length): The width of the Image Plane.
• 데이터YSize (Length): The height of the Image Plane.

View

Object Style

• 보기Lighting (Enumeration): How the Image Plane is illuminated in the 3D view. Can be Two side or One side.

되돌리기

내보내기

표준 파일 메뉴