|
|
| Расположение в меню |
|---|
| Sketch → Инструменты для эскиза → Выделить конфликтующие ограничения |
| Верстаки |
| Sketcher |
| Быстрые клавиши |
| Shift+Ctrl+E |
| Представлено в версии |
| 0.15 |
| См. также |
| Нет |
Описание
The 
Sketcher SelectConflictingConstraints tool selects the conflicting constraints in the sketch.
If such constraints exist in a sketch the Solver messages section of the Sketcher Dialog displays this message:
- Over-constrained: (#, #, #)
Where (#, #, #) are the indices of the constraints. Clicking the underlined text will select the conflicting constraints.
Применение
- There are several ways to invoke the tool:
- Click the underlined text in the Sketcher Dialog as described above.
- Select the Sketch → Sketcher visual → Select conflicting constraints option from the menu.
- Use the keyboard shortcut: Z then P, then C.
- The conflicting constraints are selected.
- Optionally click in an empty area in the 3D view to clear the selection.
Notes
- Conflicting constraints must be removed from the sketch.
- Instead of the proposed indices it is also possible to delete other constraints.
Эта страница получена от https://wiki.freecad.org/Sketcher_SelectConflictingConstraints