FreeCAD: propriul dvs. modelator parametric 3D

One-Time Monthly

$5 $10 $25 $100 $200 Other

Informaţii SEPA
Te rugăm să-ți configurezi transferul bancar SEPA în:
Beneficiary:	The FreeCAD project association
IBAN:	BE04 0019 2896 4531
BIC/SWIFT:	GEBABEBBXXX
Agenție bancară:	BNP Paribas Fortis
Adresă:	Rue de la Station 64, 1360 Perwez, Belgium

If you are not sure or not able to commit to a regular donation, but still want to help the project, you can do a one-time donation, of any amount.

Choose freely the amount you wish to donate one time only.

You can support FreeCAD by sponsoring it as an individual or organization through various platforms. Sponsorship provides a steady income for developers, allowing the FPA to plan ahead and enabling greater investment in FreeCAD. To encourage sponsorship, we offer different tiers, and unless you choose to remain anonymous, your name or company logo will be featured on our website accordingly.

from 1 USD / 1 EUR per month. You will not have your name displayed here, but you will have helped the project a lot anyway. Together, normal sponsors maintain the project on its feet as much as the bigger sponsors.

from 25 USD / 25 EUR per month. Your name or company name is displayed on this page.

from 100 USD / 100 EUR per month. Your name or company name is displayed on this page, with a link to your website, and a one-line description text.

from 200 USD / 200 EUR per month. Your name or company name and logo displayed on this page, with a link to your website and a custom description text. Companies that have helped FreeCAD early on also appear under Gold sponsors.

Instead of donating each month, you might find it more comfortable to make a one-time donation that, when divided by twelve, would give you right to enter a sponsoring tier. Don't hesitate to do so!

Choose freely the amount you wish to donate each month.

Please inform your forum name or twitter handle as a notein your transfer, or reach to us, so we can give you proper credits!

Descriere

Instrumentul Distribuire personalizată permite utilizatorului să creeze o distribuție a barei de armătură în elementul structural. Puteți defini trei segmente pentru distribuție. Pentru primul și al treilea segmente, puteți oferi atât o serie de bare de armare, cât și distanțele dintre barele de armare. Dar pentru cel de-al doilea segment, puteți da fie un număr de bare de armare sau spațiere între barele de bare, deoarece o valoare determină automat pe celelalte.

De ex.: Valorile de intrare pentru dialogul Rebar Distribuiton:

Rezultaul produs de dialogul Rebar Distribution atunci când utilizatorul face click pe butonul OK:

Această pagină este preluată de la https://wiki.freecad.org/Reinforcement_Custom_Spacing

Donate

♥ Sponsor normal

🥉 Sponsor de bronz

🥈 Sponsor argint

🥇 Sponsor de aur

Descriere