Donate

Description

The Part CrossSections command creates one or more cross-sections through the selected shape, parallel to one of the default global planes (XY, XZ or YZ).

Usage

1. Select a shape.
2. There are several ways to invoke the command:
   • Press the Cross-Section button.
   • Select the Part → Cross-Section option from the menu.
3. The Cross Sections task panel opens.
   • Define the guiding plane.
   • Define the position (height of the cross-section).
   • Optionally, check Sections to create more than one cross-section:
     • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
     • Set the count.
4. Press OK to close the task panel.
5. A Cross-Section object will be created, it inherits the name of the selected shape and adds the suffix _cs.

Notes

• App Link objects linked to the appropriate object types and App Part containers with the appropriate visible objects inside can also be used as source objects.
• The resulting object is not parametric, that is it is not linked to the original shape.
• A single object is created, even with more than one cross-section.

Example

Inputs

Result