The Part module is the direct connection between FreeCAD and the OpenCasCade kernel. It provides mainly TopoShapes which is the main object type used by OpenCascade. The Part module also contains a variety of convenience functions to create and manipulate topoShapes. Example:
import Part
mycube = Part.makeBox(2,2,2)
Part.show(mycube)
__fromPythonOCC__(OCC.Object)Description: Helper method to convert a pythonocc shape to an internal shape
Returns: A Part.Shape
__sortEdges__(list of edges)Description: Helper method to sort an unsorted list of edges so that afterwards the start and end vertex of two consecutive edges are geometrically coincident. It returns a single list of edges and the algorithm stops after the first set of connected edges which means that the output list can be smaller than the input list. The sorted list can be used to create a Wire.
Returns: a list of edges
__toPythonOCC__(Part.Shape)Description: Helper method to convert an internal shape to pythonocc shape
Returns: an OCC.Shape
cast_to_shape(Part.Shape)Description: Cast to the actual shape type
Returns:
export(list,string)Description: Export a list of objects into a single file.
Returns:
getSortedClusters(list of edges)Description: Helper method to sort and cluster a variety of edges
Returns:
insert(string,string)Description: Insert the file (path given as first argument) into the given document (second argument).
Returns:
makeBox(length,width,height,[pnt,dir])Description: Makes a box located at pnt with the dimensions (length,width,height). By default pnt is Vector(0,0,0) and dir is Vector(0,0,1)
Returns: the created shape
makeCircle(radius,[pnt,dir,angle1,angle2])Description: Makes a circle with a given radius. By default pnt is Vector(0,0,0), dir is Vector(0,0,1), angle1 is 0 and angle2 is 360
Returns: the created shape
makeCompound(list)Description: Creates a compound out of a list of shapes.
Returns: the created shape
makeCone(radius1,radius2,height,[pnt,dir,angle])Description: Makes a cone with given radii and height. By default pnt is Vector(0,0,0), dir is Vector(0,0,1) and angle is 360
Returns: the created shape
makeCylinder(radius,height,[pnt,dir,angle])Description: Makes a cylinder with a given radius and height. By default pnt is Vector(0,0,0),dir is Vector(0,0,1) and angle is 360
Returns: the created shape
makeHelix(pitch,height,radius,[angle,lefthand,heightstyle])Description: Makes a helix shape with a given pitch, height and radius. Defaults to right-handed cylindrical helix. Non-zero angle parameter produces a conical helix. Lefthand True produces left handed helix. Heightstyle applies only to conical helices. Heightstyle False (default) will cause the height parameter to be interpreted as the length of the side of the underlying frustum. Heightstyle True will cause the height parameter to be interpreted as the vertical height of the helix. Pitch is "metric pitch" (advance/revolution). For conical helix, radius is the minor radius.
Returns: the created shape
makeLine((x1,y1,z1),(x2,y2,z2))Description: Makes a line of two points
Returns: the created shape
makeLoft(shapelist<profiles>,[boolean<solid>,boolean<ruled>])Description: Creates a loft shape using the list of profiles. Optionally make result a solid (vs surface/shell) or make result a ruled surface.
Returns: the created shape
makePlane(length,width,[pnt,dir])Description: Makes a plane. By default pnt is Vector(0,0,0) and dir is Vector(0,0,1)
Returns: the created shape
makePolygon(list)Description: Makes a polygon of a list of Vectors
Returns: the created shape
makeRevolution(Curve,[vmin,vmax,angle,pnt,dir])Description: Makes a revolved shape by rotating the curve or a portion of it around an axis given by (pnt,dir). By default vmin/vmax are set to bounds of the curve,angle is 360,pnt is Vector(0,0,0) and dir is Vector(0,0,1)
Returns: the created shape
makeRuledSurface(Edge or Wire,Edge or Wire)Description: Creates a ruled surface out of two edges or wires. If wires are used then these must have the same number of edges.
Returns: the created shape
makeShell(list)Description: Creates a shell out of a list of faces. Note: Resulting shell should be manifold. Non-manifold shells are not well supported.
Returns: the created shape
makeSolid(Part.Shape)Description: Creates a solid out of the shells inside a shape.
Returns: the created shape
makeSphere(radius,[center_pnt, axis_dir, V_startAngle, V_endAngle, U_angle])Description: Makes a sphere (or partial sphere) with a given radius. By default center_pnt is Vector(0,0,0), axis_dir is Vector(0,0,1), V_startAngle is 0, V_endAngle is 90 and U_angle is 360
Returns: the created shape
makeTorus(radius1,radius2,[pnt,dir,angle1,angle2,angle])Description: Makes a torus with a given radii and angles. By default pnt is Vector(0,0,0),dir is Vector(0,0,1),angle1 is 0,angle2 is 360 and angle is 360
Returns: the created shape
makeTube(edge,float)Description: Creates a tube.
Returns: the created shape
open(string)Description: Creates a new document and load the file into the document.
Returns:
read(string)Description: Loads the file and return the shape.
Returns: a shape
show(shape)Description: Adds the shape to the active document or create one if no document exists.
Returns:
Эта страница получена от https://wiki.freecad.org/Part_API