Introduction
To get access to the Mesh module you have to import it first:
import Mesh
Creation
To create an empty mesh object just use the standard constructor:
mesh = Mesh.Mesh()
You can also create an object from a file:
mesh = Mesh.Mesh("D:/temp/Something.stl")
Or create it out of a set of triangles described by their corner points:
triangles = [
# triangle 1
[-0.5000, -0.5000, 0.0000], [0.5000, 0.5000, 0.0000], [-0.5000, 0.5000, 0.0000],
#triangle 2
[-0.5000, -0.5000, 0.0000], [0.5000, -0.5000, 0.0000], [0.5000, 0.5000, 0.0000],
]
meshObject = Mesh.Mesh(triangles)
Mesh.show(meshObject)
The Mesh-Kernel takes care of creating a topologically correct data structure by sorting coincident points and edges.
Modeling
To create regular geometries you can use one of the create*() methods. A torus, for instance, can be created as follows:
m = Mesh.createTorus(8.0, 2.0, 50)
Mesh.show(m)
The first two parameters define the radii of the torus and the third parameter is a sub-sampling factor for how many triangles are created. The higher this value the smoother the mesh.
The Mesh module also provides three Boolean methods: union(), intersection() and difference():
m1, m2 # are the input mesh objects
m3 = Mesh.Mesh(m1) # create a copy of m1
m3.unite(m2) # union of m1 and m2, the result is stored in m3
m4 = Mesh.Mesh(m1)
m4.intersect(m2) # intersection of m1 and m2
m5 = Mesh.Mesh(m1)
m5.difference(m2) # the difference of m1 and m2
m6 = Mesh.Mesh(m2)
m6.difference(m1) # the difference of m2 and m1, usually the result is different to m5
Here is an example that creates a pipe using the difference() method:
import FreeCAD, Mesh
cylA = Mesh.createCylinder(2.0, 10.0, True, 1.0, 36)
cylB = Mesh.createCylinder(1.0, 12.0, True, 1.0, 36)
cylB.Placement.Base = (FreeCAD.Vector(-1, 0, 0)) # move cylB to avoid co-planar faces
pipe = cylA
pipe = pipe.difference(cylB)
pipe.flipNormals() # somehow required
doc = FreeCAD.ActiveDocument
obj = doc.addObject("Mesh::Feature", "Pipe")
obj.Mesh = pipe
doc.recompute()
Notes
An extensive, though hard to use, source of mesh related scripting are the unit test scripts of the Mesh module.
In these unit tests literally all methods are called and all properties/attributes are tweaked.
So if you are bold enough, take a look at the Unit Test module.
See also: Mesh API.
This page is retrieved from https://wiki.freecad.org/Mesh_Scripting