Donate

ArchAxisSystemRepartition

Opis

To makro pomaga stworzyć Arch Axis System wzdłuż linii z określonym zestawem parametrów. Możesz również bezpośrednio utworzyć System Konstrukcyjny korzystając z biblioteki FreeCAD.

Użycie

• Uruchom makro z zaznaczoną linią lub bez niej.
• W panelu zadań pojawi się interfejs GUI TaskPanel.
• Ustaw długość: jeśli linia jest zaznaczona, długość jest automatycznie ustawiana i wymuszana na długość linii; jeśli nic nie jest zaznaczone, długość można zmieniać ręcznie.
• Ustaw żądany regularny odstęp; liczba podziałów oraz odstęp z lewej strony są automatycznie obliczane.
• Lub ustaw żądaną liczbę podziałów; spowoduje to równomierny podział bez odstępu z lewej strony.
• Wybierz, czy odstęp z lewej ma znajdować się na początku podziału, na końcu, czy po obu stronach ma być równy.
• Zaznacz, jeśli chcesz dodać element na początku linii, możesz ustawić przesunięcie (w kierunku końca linii).
• Zaznacz, jeśli chcesz dodać element na końcu linii – możesz ustawić przesunięcie (w kierunku początku linii).
• Aby zatwierdzić, kliknij przycisk OK:
• Jeśli linia jest zaznaczona, Arch Axis System przyjmie położenie tej linii, w przeciwnym razie położenie będzie ustawione na 0.0.0.
• Jeśli masz otwartą bibliotekę FreeCAD-Library GUI, wybrany plik FCStd lub STEP zostanie zaimportowany i utworzony zostanie System Konstrukcyjny.

Skrypt

Ikonka paska narzędzi

Macro_Repartition.FCMacro

#!/usr/bin/env python
# -*- coding: utf-8 -*-

#***************************************************************************
#*                                                                         *
#*   Copyright (c) 2014 Jonathan Wiedemann <wood.galaxy@gmail.com          *
#*                                                                         *
#*   This program is free software; you can redistribute it and/or modify  *
#*   it under the terms of the GNU Lesser General Public License (LGPL)    *
#*   as published by the Free Software Foundation; either version 2 of     *
#*   the License, or (at your option) any later version.                   *
#*   for detail see the LICENCE text file.                                 *
#*                                                                         *
#*   This program is distributed in the hope that it will be useful,       *
#*   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
#*   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
#*   GNU Library General Public License for more details.                  *
#*                                                                         *
#*   You should have received a copy of the GNU Library General Public     *
#*   License along with this program; if not, write to the Free Software   *
#*   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
#*   USA                                                                   *
#*                                                                         *
#***************************************************************************

__title__="Repartition"
__author__ = "Jonathan Wiedemann"
__url__ = "http://www.freecad-france.com"

import FreeCAD, FreeCADGui, DraftGeomUtils, DraftVecUtils
import Arch
import Part
import math
from PySide import QtCore, QtGui

class _RepartitionTaskPanel:
	def __init__(self):
		self.title = QtGui.QLabel('Repartition')
		self.grid = QtGui.QGridLayout()
		self.grid.addWidget(self.title, 1, 0)

		self.longueurLabel = QtGui.QLabel('Longueur')

		self.dSBLongueur = QtGui.QDoubleSpinBox()
		self.dSBLongueur.setRange(0., 9999999.)
		self.sel = FreeCADGui.Selection.getSelection()
		if self.sel:
			self.longueur = self.sel[0].Shape.Length
			self.dSBLongueur.setValue(self.longueur)
		else:
			self.dSBLongueur.setValue(5000.)

		self.grid.addWidget(self.longueurLabel, 2, 0)
		self.grid.addWidget(self.dSBLongueur, 2, 1)

		self.ecartementLabel = QtGui.QLabel('Ecartement')
		self.ecartementDSB = QtGui.QDoubleSpinBox()
		self.ecartementDSB.setRange(0., 9999999.)
		self.ecartementDSB.setValue(500.)
		self.grid.addWidget(self.ecartementLabel, 3, 0)
		self.grid.addWidget(self.ecartementDSB, 3, 1)

		self.qteLabel = QtGui.QLabel('Quantite')
		self.qteSB = QtGui.QSpinBox()
		self.qteSB.setRange(0,99999)
		self.grid.addWidget(self.qteLabel, 4, 0)
		self.grid.addWidget(self.qteSB, 4, 1)

		self.infoText = QtGui.QLabel('Espace restant = ')
		self.grid.addWidget(self.infoText, 5, 0)
		self.combobox = QtGui.QComboBox()
		items = ["Debut","Fin","Divise"]
		self.combobox.addItems(items)
		self.combobox.setCurrentIndex(items.index("Fin"))
		self.grid.addWidget(self.combobox, 5, 1)

		self.debutLabel = QtGui.QLabel('Debut')
		self.grid.addWidget(self.debutLabel, 6, 0)

		self.debutRepartitionCB = QtGui.QCheckBox()
		self.debutRepartitionCB.setCheckState(QtCore.Qt.CheckState.Checked)
		self.grid.addWidget(self.debutRepartitionCB, 6, 1)

		self.decalageDebutLabel = QtGui.QLabel('Decalage')
		self.grid.addWidget(self.decalageDebutLabel, 7, 0)

		self.decalageDebutDSB = QtGui.QDoubleSpinBox()
		self.decalageDebutDSB.setRange(0., 9999999.)
		self.grid.addWidget(self.decalageDebutDSB, 7, 1)

		self.finLabel = QtGui.QLabel('Fin')
		self.grid.addWidget(self.finLabel, 8, 0)

		self.finRepartitionCB = QtGui.QCheckBox()
		self.finRepartitionCB.setCheckState(QtCore.Qt.CheckState.Checked)
		self.grid.addWidget(self.finRepartitionCB, 8, 1)

		self.decalageFinLabel = QtGui.QLabel('Decalage')
		self.grid.addWidget(self.decalageFinLabel, 9, 0)

		self.decalageFinDSB = QtGui.QDoubleSpinBox()
		self.decalageFinDSB.setRange(0., 9999999.)
		self.grid.addWidget(self.decalageFinDSB, 9, 1)

		groupBox = QtGui.QGroupBox()
		groupBox.setLayout(self.grid)
		self.form = groupBox

		QtCore.QObject.connect(self.dSBLongueur,QtCore.SIGNAL("valueChanged(double)"),self.changerLongueur)
		QtCore.QObject.connect(self.ecartementDSB,QtCore.SIGNAL("valueChanged(double)"),self.changerEcartement)
		QtCore.QObject.connect(self.qteSB,QtCore.SIGNAL("valueChanged(int)"),self.changerQte)
		QtCore.QObject.connect(self.combobox,QtCore.SIGNAL("currentIndexChanged(int)"),self.afficherResultats)
		self.changerLongueur()

	def recupererDonnees(self):
		self.sel = FreeCADGui.Selection.getSelection()
		if self.sel:
			self.longueur = self.sel[0].Shape.Length
		else:
			self.longueur = self.dSBLongueur.value()
		self.ecartementRegulier = self.ecartementDSB.value()
		self.qteEcartement = self.qteSB.value()

		self.objetDebut =  self.debutRepartitionCB.isChecked()
		self.decalageDebut = self.decalageDebutDSB.value()
		self.plEspaceRestant = self.combobox.currentIndex()
		self.objetFin = self.finRepartitionCB.isChecked()
		self.decalageFin = self.decalageFinDSB.value()

	def changerLongueur(self):
		self.recupererDonnees()
		self.qteEcartement = int(math.ceil(self.longueur/self.ecartementRegulier))
		self.afficherResultats()

	def changerEcartement(self):
		self.recupererDonnees()
		self.qteEcartement = int(math.ceil(self.longueur/self.ecartementRegulier))
		self.afficherResultats()

	def changerQte(self):
		self.recupererDonnees()
		self.ecartementRegulier = self.longueur/self.qteEcartement
		self.afficherResultats()

	def afficherResultats(self):
		self.dSBLongueur.blockSignals(True)
		self.dSBLongueur.setValue(self.longueur)
		self.dSBLongueur.blockSignals(False)

		self.ecartementDSB.blockSignals(True)
		self.ecartementDSB.setValue(self.ecartementRegulier)
		self.ecartementDSB.blockSignals(False)


		self.qteSB.blockSignals(True)
		self.qteSB.setValue(self.qteEcartement)
		self.qteSB.blockSignals(False)

		self.espaceRestant = self.longueur - (self.qteEcartement-1) * self.ecartementRegulier
		if round(self.espaceRestant,2) == round(self.ecartementRegulier,2):
			self.espaceRestant = 0.
		if self.combobox.currentIndex() == 2:
			self.infoText.setText( str('Espace restant = 2 x ') + str(round(self.espaceRestant/2,2)) + str(' mm') )
		else:
			self.infoText.setText( str('Espace restant = ') + str(round(self.espaceRestant,2)) + str(' mm') )

	def accept(self):
		self.recupererDonnees()
		distancesListe = []
		if self.objetDebut:
			distancesListe.append(self.decalageDebut)
		if self.plEspaceRestant == 0:
			distancesListe.append(self.espaceRestant)
		if self.plEspaceRestant == 1:
			distancesListe.append(self.ecartementRegulier-self.decalageDebut)
		if self.plEspaceRestant == 2:
			distancesListe.append(self.espaceRestant/2-self.decalageDebut)
		for i in range(self.qteEcartement-2):
			distancesListe.append(self.ecartementRegulier)
		if self.objetFin:
			if self.plEspaceRestant == 0:
				distancesListe.append(self.ecartementRegulier-self.decalageFin-self.decalageDebut)
			if self.plEspaceRestant == 1:
				distancesListe.append(self.espaceRestant-self.decalageFin)
			if self.plEspaceRestant == 2:
				distancesListe.append(self.ecartementRegulier)
				distancesListe.append((self.espaceRestant/2)-self.decalageFin)
		repartition = Arch.makeAxis(num=len(distancesListe), name="Repartition")
		repartition.Length = 1000.00
		repartition.Distances= distancesListe

		self.sel = FreeCADGui.Selection.getSelection()
		if self.sel:
			edges = DraftGeomUtils.sortEdges(self.sel[0].Shape.Wires[0].Edges)
			vec1 = edges[0].Vertexes[-1].Point.sub(edges[0].Vertexes[0].Point)
			point1 = edges[0].Vertexes[0].Point
			rot = math.degrees(DraftVecUtils.angle(vec1))*-1
			repartition.Placement = App.Placement(App.Vector(point1),App.Rotation(App.Vector(0.0,0.0,1.0),rot))
			FreeCAD.ActiveDocument.recompute()
		else:
			repartition.Placement = App.Placement(App.Vector(0.0,0.0,0.0),App.Rotation(App.Vector(0.0,0.0,1.0),0))

		m = FreeCADGui.getMainWindow()
		w = m.findChild(QtGui.QDockWidget,"PartsLibrary")
		if w:
			if w.isVisible():
				index = w.folder_view.selectedIndexes()[0]
				path = w.dirmodel.filePath(index)
				if path.lower().endswith(".stp") or path.lower().endswith(".step") or path.lower().endswith(".brep"):
					objetRepartit = Part.show(Part.read(path))
				else:
					objetRepartit = FreeCADGui.ActiveDocument.mergeProject(path)
				repartitionStructurel = Arch.makeStructuralSystem([FreeCAD.ActiveDocument.Objects[-1],],[repartition,], name="RepartitionStructurelle")
		return True

	def reject(self):
		return True

	def getStandardButtons(self):
		return int(QtGui.QDialogButtonBox.Ok|QtGui.QDialogButtonBox.Cancel)


panel=_RepartitionTaskPanel()
FreeCADGui.Control.showDialog(panel)

Łącza

• Wideo Makro w akcji
• Macro_PartsLibrary Biblioteka FreeCAD
• Github Macro wood galaxy