FreeCAD Logo FreeCAD 1.0
  • İngilizce Afrika dili Arapça Belarusça Katalanca Çekçe Almanca Yunanca İspanyolca İspanyolca Baskça Fince Filipince Fransızca Galiçya Dili Hırvatça Macarca Endonezce İtalyanca Japonca Berberice Korece Litvanyaca Flemenkçe Bokmal Norveç Dili Lehçe Portekizce Portekizce Romence Rusça Slovakça Slovence Sırpça İsveççe Türkçe Ukraynaca Valensiya Dili Vietnamca Çince Çince
  • Özellikler
  • İndir
  • Blog
  • Dökümanlar
    Belge dizini Başlarken Kullanıcı belgeleri FreeCAD kılavuzu Çalışma Tezgahları Belgeleri Python kodlama belgeleri C++ kodlama belgeleri Öğreticiler Sıkça Sorulan Sorular Privacy policy FreeCAD hakkında
  • Katkıda bulun
    Nasıl yardım edilir Sponsor Bir hata bildir Çekme isteğinde bulunun İşler ve finansman Katılımcı Yönergeleri Geliştirici el kitabı Çeviriler
  • Topluluk
    Code of conduct Forum The FPA GitHub GitLab Codeberg Mastodon Matrix IRC IRC via Webchat Gitter Discord Reddit Twitter Facebook LinkedIn Calendar
  • ♥ Donate

Donate

$
SEPA Bilgisi
Lütfen SEPA banka havalenizi şu adrese ayarlayın:
Beneficiary: The FreeCAD project association
IBAN: BE04 0019 2896 4531
BIC/SWIFT: GEBABEBBXXX
Banka acentesi: BNP Paribas Fortis
Adres: Rue de la Station 64, 1360 Perwez, Belgium

While Stripe doesn't support monthly donations, you can still become a sponsor! Simply make a one-time donation equivalent to 12 months of support, and you'll gain access to the corresponding sponsoring tier. It's an easy and flexible way to contribute.

If you are not sure or not able to commit to a regular donation, but still want to help the project, you can do a one-time donation, of any amount.

Choose freely the amount you wish to donate one time only.

You can support FreeCAD by sponsoring it as an individual or organization through various platforms. Sponsorship provides a steady income for developers, allowing the FPA to plan ahead and enabling greater investment in FreeCAD. To encourage sponsorship, we offer different tiers, and unless you choose to remain anonymous, your name or company logo will be featured on our website accordingly.

from 1 USD / 1 EUR per month. You will not have your name displayed here, but you will have helped the project a lot anyway. Together, normal sponsors maintain the project on its feet as much as the bigger sponsors.

from 25 USD / 25 EUR per month. Your name or company name is displayed on this page.

from 100 USD / 100 EUR per month. Your name or company name is displayed on this page, with a link to your website, and a one-line description text.

from 200 USD / 200 EUR per month. Your name or company name and logo displayed on this page, with a link to your website and a custom description text. Companies that have helped FreeCAD early on also appear under Gold sponsors.

Instead of donating each month, you might find it more comfortable to make a one-time donation that, when divided by twelve, would give you right to enter a sponsoring tier. Don't hesitate to do so!

Choose freely the amount you wish to donate each month.

Please inform your forum name or twitter handle as a notein your transfer, or reach to us, so we can give you proper credits!

Snap WorkingPlane
ToggleGrid
Draft

Taslak Boyutlar

Menü konumu
Taslak → Yakalama → Boyutlar
Tezgahlar
Taslak, Mimari
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
-
Ayrıca bkz
Hiçbiri

Description

Açıklama

Taslak boyutunu oluşturan üç satırdan birini yakalamanızı sağlar.

Temporary dimensions show the position of the cursor

Kullanım

  1. Yakalama modunun açık olduğundan emin olun
  2. Yakalama öğesinin eklemek istediğiniz öğeyi (örneğin taslak çizgisi) FreeCAD belgesine eklenmesini sağlayın
  3. İmlecin sağ tarafında, Yakalama modunun sembolü görünecektir.
  4. Öğenizi hedef öğenin taslak boyutunun seçilen çizgisine eklemek için tıklayın.

For general information about snapping see Draft Snap.

  1. Optionally change the working plane.
  2. Make sure snapping is enabled. See Draft Snap Lock.
  3. If Draft Snap Dimensions is not active do one of the following:
    • Press the Snap dimensions button in the Draft snap toolbar.
    • Draft: Press the Snap dimensions button in the Draft snap widget.
    • BIM: Select the Snapping → Snap dimensions option from the menu, or from the 3D view context menu.
  4. Choose a Draft or BIM command to create your geometry.
  5. Note that you can also change snap options while a command is active.
  6. Pick a first point. This snap option requires a previous point.
  7. As you move the cursor around temporary dimensions are displayed.

Preferences

See Draft Snap.


Snap WorkingPlane
ToggleGrid
Draft

Bu sayfa şu adresten alınmıştır https://wiki.freecad.org/Draft_Snap_Dimensions

İletişime geçin!
Forum GitHub Mastodon Matrix IRC Gitter.im Discord Reddit Twitter Facebook LinkedIn

© The FreeCAD Team. Homepage image credits (top to bottom): ppemawm, r-frank, epileftric, regis, rider_mortagnais, bejant.

Bu proje aşağıdakiler tarafından desteklenmektedir: , KiCad Services Corp. ve diğer sponsorlar

GitHubImprove this page on GitHub