THIS COMMAND IS OBSOLETE
Both the command and the Drawing Workbench it works with are not available in 0.21 and above. Use the TechDraw Workbench and the TechDraw DraftView command instead.
Both the command and the Drawing Workbench it works with are not available in 0.21 and above. Use the TechDraw Workbench and the TechDraw DraftView command instead.
|
|
| Menyplacering |
|---|
| Drafting → Drawing |
| Arbetsbänkar |
| Skiss |
| Standard genväg |
| Ingen |
| Introducerad i version |
| - |
| Se även |
| Ingen |
Beskrivning
detta verktyg tillåter dig att lägga valda objekt på ett svg ritningsark.
This command is similar to the Drawing View command but is optimized for Draft objects. Contrary to that command, it can handle specific objects such as Draft Dimensions and Draft Texts, and it can render faces.
This command is now obsolete. Use the TechDraw Workbench and the TechDraw DraftView command instead.
On the left the selected Draft objects. On the right the created drawing views.
Bruk
- To use this command in FreeCAD version 0.19 and later you need to add a button to a custom toolbar. See Interface Customization.
- Select one or more objects. A separate view will be created for each object.
- Optionally add a Drawing page to the selection. If you do not, the view is inserted into the first page in the document. If there are no pages in the document a new page is created first.
- Press the
Draft Drawing button. - There is a bug in the FreeCAD version 0.19 version of the command. The initial value of the DataDirection property is
[0, 0, 0]which is not allowed. For objects on a plane parallel to the XY plane of the global coordinate system it should be changed to[0, 0, 1]. After changing this property the page and the view may need to be recomputed.
Denna sida hämtas från https://wiki.freecad.org/Draft_Drawing