|
|
| Posizione nel menu |
|---|
| Nessuno |
| Ambiente |
| CurvedShapes |
| Avvio veloce |
| Nessuno |
| Introdotto nella versione |
| - |
| Vedere anche |
| Nessuno |
Descrizione
Crea un array e ridimensiona gli elementi all'interno di una o più curve limite. In questo esempio, la forma di base arancione viene ridimensionata entro le curve limite rosse e viola. Le curve non devono essere collegate. Le curve limite devono trovarsi sul piano XY, XZ o YZ, o su un piano parallelo.
Utilizzo
- Select the input curves.
- There are several ways to invoke the command:
- Press the
Curved Array button. - Select the Curved Shapes → Curved Array option from the menu.
- Press the
- In the Property View, adjust the number of items, as well as the offset end and start parameters, to create the desired shape.
- In the Property View, select the checkbox for 'Surface' or 'Solid' depending on the desired result
Notes
- The first curve that you select for CurvedArray creation will be the item that is swept and resized in the bounds of the other selected curves.
- When creating a surface, be aware that CurvedArray may actually create a compound (separated at a location where the cross section curve intersects the surface generated by the tool). It will then fail to offset unless a boolean operation is used to join the surfaces together, or an explode compound operation is used to separate them to be worked with independently.
Properties
Base
- DatiBase: The object to make an array from
- DatiHullcurves: List of one or more bounding curves
- DatiAxis: Direction axis of the Base shape
- DatiItems: Number of array items
- DatiOffsetStart: Offset of the first part in Axis direction
- DatiOffsetEnd: Offset of the last part from the end in opposite Axis direction
- DatiTwist: Applies a rotation around Axis to the array items
- DatiSurface: Creates a surface over the array items
- DatiSolid: Creates a solid if Base is a closed shape
Questa pagina è recuperata da https://wiki.freecad.org/CurvedShapes_CurvedArray