Introduction
It is possible to import the FreeCAD module into a Python application, and use all its tools from the host application, but the graphical user interface (GUI) can be imported as a Python module as well. Normally you can only import the complete interface as a whole, not pieces of it; this is because the FreeCAD interface system is not only made of independent widgets and toolbars, but is a complex construction where several invisible components (such as the selection system, etc) are needed for the main 3D view to be able to function.
But, with a bit of hacking, it is possible to import the whole FreeCAD interface, then move the 3D view from it to your own Qt application. We show here 3 different methods.
Using the FreeCAD 3D view widget directly
Be aware that there are a lot of problems with this approach. The Qt event handling doesn't seem to work (no idea why) and if you use the 3d view's context-menu the application crashes. A better way could be to create your own 3d view SoQtExaminerViewer or SoQtViewer and "push" the content of FreeCAD's 3d view to your view, as shown in the other sections below.
First, get the main window via PySide:
from PySide import QtGui
from PySide import QtCore
def getMainWindow():
toplevel = QtGui.qApp.topLevelWidgets()
for i in toplevel:
if i.metaObject().className() == "Gui::MainWindow":
return i
raise Exception("No main window found")
mw = getMainWindow()
Then get the View3DInventor view the same way:
def get3dview(mw):
childs=mw.findChildren(QtGui.QMainWindow)
for i in childs:
if i.metaObject().className() == "Gui::View3DInventor":
return i
return None
v = get3dview(mw)
The following code is generated automatically, by creating a Ui-file with QtDesigner, and converting it to python code with the pyuic tool:
# -*- coding: utf-8 -*-
# Form implementation generated from reading ui file 'mainwindow.ui'
#
# Created: Sun Dec 27 11:18:56 2009
# by: PySide UI code generator 4.6
#
# Modify for PySide 11/02/2015
# Python version: 2.7.8
# Qt version: 4.8.6
#
# WARNING! All changes made in this file will be lost!
from PySide import QtCore, QtGui
class Ui_MainWindow(object):
def setupUi(self, MainWindow):
MainWindow.setObjectName("MainWindow")
MainWindow.resize(508, 436)
self.centralwidget = QtGui.QWidget(MainWindow)
self.centralwidget.setObjectName("centralwidget")
self.gridLayout = QtGui.QGridLayout(self.centralwidget)
self.gridLayout.setObjectName("gridLayout")
self.mdiArea = QtGui.QMdiArea(self.centralwidget)
self.mdiArea.setViewMode(QtGui.QMdiArea.TabbedView)
self.mdiArea.setTabPosition(QtGui.QTabWidget.South)
self.mdiArea.setObjectName("mdiArea")
self.gridLayout.addWidget(self.mdiArea, 0, 0, 1, 1)
MainWindow.setCentralWidget(self.centralwidget)
self.menubar = QtGui.QMenuBar(MainWindow)
self.menubar.setGeometry(QtCore.QRect(0, 0, 508, 27))
self.menubar.setObjectName("menubar")
MainWindow.setMenuBar(self.menubar)
self.statusbar = QtGui.QStatusBar(MainWindow)
self.statusbar.setObjectName("statusbar")
MainWindow.setStatusBar(self.statusbar)
self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
def retranslateUi(self, MainWindow):
MainWindow.setWindowTitle(QtGui.QApplication.translate("MainWindow", "MainWindow", None, QtGui.QApplication.UnicodeUTF8))
Then, create a main window that should be your application's main window, apply the UI setup above to it in order to add an MDI area and "move" our 3D view to it.
ui = Ui_MainWindow()
my_mw = QtGui.QMainWindow()
ui.setupUi(my_mw)
ui.mdiArea.addSubWindow(v)
my_mw.show()
Creating a soGui Examiner Viewer
Alternatively, you can also use the FreeCADGui module to extract a OpenInventor (Coin) representation of the objects of your scene, then use that data in an external viewer (your application). Here is an easy way to get the 3D representation of an object.
from pivy import coin
import FreeCAD as App
box = App.activeDocument().addObject("Part::Box", "myBox")
s = box.ViewObject.toString() # store as string
inp = coin.SoInput()
inp.setBuffer(s)
myNode = coin.SoDB.readAll(inp) # restore from string
Then, create a standalone viewer with Pivy:
from pivy.sogui import *
from pivy.coin import *
import sys
def myViewer():
# Initialize Coin. This returns a main window to use.
# If unsuccessful, exit.
myWindow = SoGui.init(sys.argv[0])
if myWindow == None:
sys.exit(1)
# Make an empty scene and add our node to it
scene = SoSeparator()
scene.addChild(myNode)
# Create a viewer in which to see our scene graph.
viewer = SoGuiExaminerViewer(myWindow)
# Put our scene into viewer, change the title
viewer.setSceneGraph(scene)
viewer.setTitle("FreeCAD Object Viewer")
viewer.show()
SoGui.show(myWindow) # Display main window
SoGui.mainLoop() # Main Coin event loop
Then you just need to run your viewer:
myViewer()
Using the quarter module
Instead of using the sogui viewer, you can also use the more modern quarter module. This is generally the best of the three options.
#!/usr/bin/env python
###
# Copyright (c) 2002-2008 Kongsberg SIM
#
# Permission to use, copy, modify, and distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
#
import os
import sys
from PySide import QtCore, QtGui
from PySide.QtGui import QMainWindow, QWorkspace, QAction, QFileDialog, QApplication
from pivy.coin import SoInput, SoDB
from pivy.quarter import QuarterWidget
import FreeCAD, FreeCADGui
def getMainWindow():
toplevel = QtGui.qApp.topLevelWidgets()
for i in toplevel:
if i.metaObject().className() == "Gui::MainWindow":
return i
raise Exception("No main window found")
class MdiQuarterWidget(QuarterWidget):
def __init__(self, parent, sharewidget):
QuarterWidget.__init__(self, parent=parent, sharewidget=sharewidget)
def loadFile(self, filename):
in_ = SoInput()
if (in_.openFile(str(filename.toLatin1()))):
root = SoDB.readAll(in_)
if (root):
self.setSceneGraph(root)
self.currentfile = filename
self.setWindowTitle(filename)
return True
return False
def currentFile(self):
return self.currentfile
def minimumSizeHint(self):
return QtCore.QSize(640, 480)
class MdiMainWindow(QMainWindow):
def __init__(self, qApp):
QMainWindow.__init__(self)
self._firstwidget = None
self._workspace = QWorkspace()
self.setCentralWidget(self._workspace)
self.setAcceptDrops(True)
self.setWindowTitle("Pivy Quarter MDI example")
filemenu = self.menuBar().addMenu("&File")
windowmenu = self.menuBar().addMenu("&Windows")
fileopenaction = QAction("&Create Box", self)
fileexitaction = QAction("E&xit", self)
tileaction = QAction("Tile", self)
cascadeaction = QAction("Cascade", self)
filemenu.addAction(fileopenaction)
filemenu.addAction(fileexitaction)
windowmenu.addAction(tileaction)
windowmenu.addAction(cascadeaction)
self.connect(fileopenaction, QtCore.SIGNAL("triggered()"), self.createBoxInFreeCAD)
self.connect(fileexitaction, QtCore.SIGNAL("triggered()"), QtGui.qApp.closeAllWindows)
self.connect(tileaction, QtCore.SIGNAL("triggered()"), self._workspace.tile)
self.connect(cascadeaction, QtCore.SIGNAL("triggered()"), self._workspace.cascade)
windowmapper = QtCore.QSignalMapper(self)
self.connect(windowmapper, QtCore.SIGNAL("mapped(QWidget *)"), self._workspace.setActiveWindow)
self.dirname = os.curdir
def dragEnterEvent(self, event):
# just accept anything...
event.acceptProposedAction()
def dropEvent(self, event):
mimedata = event.mimeData()
if mimedata.hasUrls():
path = mimedata.urls().takeFirst().path()
self.open_path(path)
def closeEvent(self, event):
self._workspace.closeAllWindows()
def open(self):
self.open_path(QFileDialog.getOpenFileName(self, "", self.dirname))
def open_path(self, filename):
self.dirname = os.path.dirname(str(filename.toLatin1()))
if not filename.isEmpty():
existing = self.findMdiChild(filename)
if existing:
self._workspace.setActiveWindow(existing)
return
child = self.createMdiChild()
if (child.loadFile(filename)):
self.statusBar().showMessage("File loaded", 2000)
child.show()
else:
child.close()
def findMdiChild(self, filename):
canonicalpath = QtCore.QFileInfo(filename).canonicalFilePath()
for window in self._workspace.windowList():
mdiwidget = window
if mdiwidget.currentFile() == canonicalpath:
return mdiwidget
return 0;
def createMdiChild(self):
widget = MdiQuarterWidget(None, self._firstwidget)
self._workspace.addWindow(widget)
if not self._firstwidget:
self._firstwidget = widget
return widget
def createBoxInFreeCAD(self):
widget = MdiQuarterWidget(None, self._firstwidget)
self._workspace.addWindow(widget)
if not self._firstwidget:
self._firstwidget = widget
widget.show()
doc = FreeCAD.newDocument()
doc.addObject("Part::Box","myBox")
iv_=FreeCADGui.getDocument(doc.Name).getObject("myBox").toString()
in_ = SoInput()
in_.setBuffer(iv_)
root = SoDB.readAll(in_)
if (root):
widget.setSceneGraph(root)
def main():
app = QApplication(sys.argv)
mdi = MdiMainWindow(app)
mdi.show()
FreeCADGui.showMainWindow() # setup the GUI stuff of FreeCAD
mw=getMainWindow()
mw.hide() # hide all
if len(sys.argv)==2:
mdi.open_path(QtCore.QString(sys.argv[1]))
sys.exit(app.exec_())
def show():
mdi = MdiMainWindow(QtGui.qApp)
mdi.show()
mw=getMainWindow()
#mw.hide() # hide all
if __name__ == '__main__':
main()
Without even firing up the FreeCAD Gui
Starting from FreeCAD rev2760 (2010, 1), it is now possible to obtain the coin representation of any FreeCAD object without opening the main window. This makes it extremely easy to implement your own viewer and transparently have FreeCAD updating it. After importing the FreeCADGui module, you need to fire it up with the setupWithoutGUI() method, after which you can use all of FreeCAD's view providers to obtain OpenInventor (Coin) nodes.
import os, sys, FreeCAD, FreeCADGui
from PyQt4 import QtCore, QtGui
from PyQt4.QtGui import QMainWindow, QWorkspace, QAction, QFileDialog, QApplication
from pivy.coin import SoInput, SoDB, sogui
class MdiMainWindow(QMainWindow):
def __init__(self, qApp):
QMainWindow.__init__(self)
self._firstwidget = None
self._workspace = QWorkspace()
self.setCentralWidget(self._workspace)
self.setAcceptDrops(True)
self.setWindowTitle("Pivy Quarter MDI example")
self.viewers=[]
filemenu = self.menuBar().addMenu("&File")
windowmenu = self.menuBar().addMenu("&Windows")
fileopenaction = QAction("&Create Box", self)
fileexitaction = QAction("E&xit", self)
tileaction = QAction("Tile", self)
cascadeaction = QAction("Cascade", self)
filemenu.addAction(fileopenaction)
filemenu.addAction(fileexitaction)
windowmenu.addAction(tileaction)
windowmenu.addAction(cascadeaction)
self.connect(fileopenaction, QtCore.SIGNAL("triggered()"), self.createBoxInFreeCAD)
self.connect(fileexitaction, QtCore.SIGNAL("triggered()"), QtGui.qApp.closeAllWindows)
self.connect(tileaction, QtCore.SIGNAL("triggered()"), self._workspace.tile)
self.connect(cascadeaction, QtCore.SIGNAL("triggered()"), self._workspace.cascade)
windowmapper = QtCore.QSignalMapper(self)
self.connect(windowmapper, QtCore.SIGNAL("mapped(QWidget *)"), self._workspace.setActiveWindow)
def closeEvent(self, event):
self._workspace.closeAllWindows()
def createBoxInFreeCAD(self):
widget = QtGui.QWidget(self._firstwidget)
viewer = sogui.SoGuiExaminerViewer(widget)
self._workspace.addWindow(widget)
if not self._firstwidget:
self._firstwidget = widget
widget.show()
self.viewers.append(viewer)
doc = FreeCAD.newDocument()
obj=doc.addObject("Part::Box","myBox")
doc.recompute()
root=FreeCADGui.subgraphFromObject(obj)
viewer.setSceneGraph(root)
def main():
app = QApplication(sys.argv)
mdi = MdiMainWindow(app)
mdi.show()
FreeCADGui.setupWithoutGUI()
sys.exit(app.exec_())
if __name__ == '__main__':
main()
Or, if using pivy's sogui module doesn't work for you (the sogui module is becoming obsoleted and the coin developers are now favoring the new quarter library, which has much better interaction with qt), this is the same script but with using quarter:
#!/usr/bin/env python
import os
import sys
from PyQt4 import QtCore, QtGui
from PyQt4.QtGui import QMainWindow, QWorkspace, QAction, QApplication
from pivy.coin import SoInput, SoDB
from pivy.quarter import QuarterWidget
import FreeCADGui
class MdiQuarterWidget(QuarterWidget):
def __init__(self, parent, sharewidget):
QuarterWidget.__init__(self, parent=parent, sharewidget=sharewidget)
def minimumSizeHint(self):
return QtCore.QSize(640, 480)
class MdiMainWindow(QMainWindow):
def __init__(self, qApp):
QMainWindow.__init__(self)
self._firstwidget = None
self._workspace = QWorkspace()
self.setCentralWidget(self._workspace)
self.setAcceptDrops(True)
self.setWindowTitle("Pivy Quarter MDI example")
filemenu = self.menuBar().addMenu("&File")
windowmenu = self.menuBar().addMenu("&Windows")
fileopenaction = QAction("&Create Box", self)
fileexitaction = QAction("E&xit", self)
tileaction = QAction("Tile", self)
cascadeaction = QAction("Cascade", self)
filemenu.addAction(fileopenaction)
filemenu.addAction(fileexitaction)
windowmenu.addAction(tileaction)
windowmenu.addAction(cascadeaction)
self.connect(fileopenaction, QtCore.SIGNAL("triggered()"), self.createBoxInFreeCAD)
self.connect(fileexitaction, QtCore.SIGNAL("triggered()"), QtGui.qApp.closeAllWindows)
self.connect(tileaction, QtCore.SIGNAL("triggered()"), self._workspace.tile)
self.connect(cascadeaction, QtCore.SIGNAL("triggered()"), self._workspace.cascade)
windowmapper = QtCore.QSignalMapper(self)
self.connect(windowmapper, QtCore.SIGNAL("mapped(QWidget *)"), self._workspace.setActiveWindow)
self.dirname = os.curdir
def closeEvent(self, event):
self._workspace.closeAllWindows()
def createBoxInFreeCAD(self):
d=FreeCAD.newDocument()
o=d.addObject("Part::Box")
d.recompute()
s=FreeCADGui.subgraphFromObject(o)
child = self.createMdiChild()
child.show()
child.setSceneGraph(s)
def createMdiChild(self):
widget = MdiQuarterWidget(None, self._firstwidget)
self._workspace.addWindow(widget)
if not self._firstwidget:
self._firstwidget = widget
return widget
def main():
app = QApplication(sys.argv)
FreeCADGui.setupWithoutGUI()
mdi = MdiMainWindow(app)
mdi.show()
sys.exit(app.exec_())
if __name__ == '__main__':
main()
Additional information
In the source code there are examples of embedding FreeCAD with various graphical toolkits:
Denna sida hämtas från https://wiki.freecad.org/Embedding_FreeCADGui